Products

Amps: 19.8Bearings: BallDuty Cycle: ContinuousEfficiency: 0.825Enclosure Material: SteelEnclosure Type: TEFC (Totally Enclosed Fan Cooled)Frame: 18...

Amps: 32Bearings: BallDuty Cycle: ContinuousEfficiency: 0.815Enclosure Material: SteelEnclosure Type: TEFC (Totally Enclosed Fan Cooled)Frame: 213J...

Amps: 41.5Bearings: BallDuty Cycle: ContinuousEfficiency: 0.838Enclosure Material: SteelEnclosure Type: TEFC (Totally Enclosed Fan Cooled)Frame: 21...

Amps: 20Bearings: BallDuty Cycle: ContinuousEfficiency: 0.84Enclosure Material: SteelEnclosure Type: ODP (Open Dripproof)Frame: 184THP: 5Hz: 60Insu...

.30 Amps 460 Volt 1550 RPM .03 HP Totally Enclosed Non-Ventilated (TENV) Rotation: CW Lead End Universal # JA2R301N

Single Phase 1/20 HP 208-240/460 Volt (Multi-tapped; 5 leads allow for selecting desired voltage) 1550 RPM .8/.4 Amps Rotation: CCW Sha...

HP: 1/30 RPM: 1550 Volts: 208-230/277

.016 HP  1540 RPM .78 amp 120V 60HZ Shaft: 1 1/4 in x 5/16 in  CW Rotation (replaces 7163-5235, 7163-9677)

Original Fasco # 7121-2086

Power Drive Number AK34-7/8

Light Duty Fixed Bore Sheave O.D. 2.0" Bore 1/2" Cross Ref. #AK20X1/2, 3X760 D.D. for 3L Belts: 1.41 Construction type: Block L: 1 3/8 D.D.A or 4L ...

2 1/2" OD 5/8" Fixed Bore Use with 3L & A (4L) V-Belts Single Groove

3.0" Outside Diameter 1/2" Bore Size (fixed) Cast Iron Single Groove Fixed Bore Cast Iron Made for A 4L V-belts Browning No. AK30 Grainger No. 3X817

V-Belt Pulley 3.95" Outside Diameter 5/8" Bore Fixed Bore Single Groove Keyseat: 3/16" x 3/32" Cast Iron For Use with 3L, 4L, A or AX Type V-belts

4.95" OD 7/8" Bore Single Groove Fixed Bore "B" Section Pulley

1/4 hp 2-Speed 1625 RPM 115 Volts 3.9 amps 60hz. Motor Diameter: 5" Shaft Dimensions: 1/2 x 6.25" flatted Motor Length (less shaft): 3.35" Rotation...

1/16 HP 1200 RPM 115 Volt 1.5 Amps Thermally Protected Permanent Split Capacitor (8 MFD 250V Capacitor Included) OEM Replacement for Gemini GC/GN ...

1/10 HP 1050 RPM 115 Volt 3.4 Amps Shaded Pole Shaft Length: 3-1/4" Shaft Diameter: 1/2" Motor Length (minus shaft and ...

Complete Modine power exhaust assembly, gasket included Weight: 7 lbs.

1/15 HP 1075 RPM 115 Volt 42 Frame (5" Diameter) 1/2" Diameter Shaft Modine Unit Heater Motor

2.5 Amps 120 Volt 1050 RPM Motor Diameter: 5" Motor Length (less shaft): 3 7/8" Shaft Dimensions: 1/2 x 2 1/4" Mounts with 4 studs on sh...

Product Type: Shaded Pole RPM: 1050 Volts: 115 Amps: 1.4 Hz: 60 Frame: 5" Enclosure: Totally Enclosed Air-Over (TEAO)...

1/15 HP 1550 RPM 115 Volt 2.4 Amp Motor Diameter: 3 3/8" Shaft Dimensions: 5/16 x 2" 2 Leads, 36" Long Mounts with 4 studs on shaft end, 2 7/8" bol...

.03 HP 1100 RPM 115 Volt FP-26781 ...

Please check the U.S. Motors 8955 here as a possible replacement. Note that the 8955's dimensions differ, 15MFD/370V capacitor is not included, it ...

Product Type: Shaded Pole RPM: 1550 Volts: 208-30 Phase: 1 Frame: Unit Bearing Enclosure Type: TEAO (Totally Enclosed Air Over) Enclosure Material:...

1/35 HP 1550 RPM 115 Volt 1.4 Amp Rotation: CW Shaft End Shaft Dimensions: 5/16 x 1 1/2" PEMS OEM Replacement for PennVent Zephyr ZJ1 (Zephyr Jr.) ...

1/80 HP 120 Volts 1480 RPM .64 Amps Shaded Pole 3 Spd 60 HZ Motor Dia: 3-3/8" "A" Dimension 2-1/4" Shaft:1-1/4" L x 5/10" Diameter

PEMS OEM Replacement Motor for Penn Vent Zephyr Z3H & Z5H Ceiling Vent Fans Shaded Pole 2 Speed 1500/1350 RPM 115V 1/.5 Amps Rotation: CWSE (...

OEM Replacement for Penn Vent Zephyr ceiling vent fans Replaces A.O. Smith model# JA2M414N and JA2M414, Penn Vent # 56343-0 1550/1050 RPM 115 Volt...

120 Volt 0.58 Amps 1550 RPM Rotation: CCW Lead End Shaft Dimensions: 5/16 x 1.562" Motor Length (less shaft): 2.688" Replaces: S3573...